Contact Us | Toll Free

MPO to LC Breakout Cables

Specifications:

MTP Cables with FiberShield

The MPO to LC breakout cable allows the redistribution of various optical fibers to individual devices without additional networking equipment. OptoSpan MPO-LC breakout cables reduce the overall cost and setup time for complex high density networking environments.  With additional protective jacketing or fire-resistant materials, this line of fiber optic cables simplifies short range data transmission even in harsh working environments.

OptoSpan’s 12 and 24 fiber MPO cables feature a new and exclusive FiberShield design, comprising a stronger 4.5mm cable structure with an additional layer of Kevlar and 3x the protective jacket.  This makes FiberShield cables 5x stronger than ordinary 3.0 mm MPO cables.

Available in standard jacketing with 8 or up to 144 individual fibers, the MPO-LC breakout cable eliminates the need for more complex Fiber Patch Panels in a relatively short range. Offered in lengths from 1m up to 150m, these breakout cables are the most economical solution for smaller networking environments which may not require complex and expensive equipment.

MPO-LC breakout cable assemblies are most often used to reduce the amount of additional networking hardware within short distances. Their ability to redistribute multiple fibers from a single source to various devices allows for one cable assembly to eliminate the necessity for expensive networking equipment therefore reducing cost, setup time and complexity of fiber networks.

Alternative protection such as the SteelPatch Armored jacket is available to increase the durability of the MPO-LC breakout cable. Composed of two protective layers consisting of a steel braid resting on top of a Kevlar tube, this protective jacketing prevents against accidental or animal damages which may occur in the field.

All listed MPO breakout cable assemblies may be altered as per customer specifications.  Such alterations may include but are not limited to polarity, key orientations, or length of fiber assembly.

Availability of each standard OptoSpan MPO breakout cable assembly is conveniently listed below.  Please contact our support team in order to create specialized cable assemblies in order to suit your unique networking requirements.  Other OptoSpan MPO Fiber Cables include 8-144 Fiber MPO Cables, Plenum MPO Patch Cords, and Plenum MPO to LC Breakout Cables.

Click Here for additional information on OptoSpan MPO Cables.

For all other OptoSpan Fiber Optic Cables, please see Fiber Patch Cables, Armored Fiber Optic Cables, MTP Cables, Specialty Fiber Optic Cables, Breakout Fiber Optic Cables, Bend Insensitive Fiber Cables, and Bulk/Bare Fiber Spools.

Configurations:

  • Internal Fiber Count: 8 to 144 fiber strands per cable assembly
  • Internal Fiber Configurations: 12×1, 12×2, 12×4, 12×6, 12×8, 12×12, 24×1, 24×2, 24×3, 24×4, 24×6
  • Connectors: MPO
  • Cable Assembly Lengths: 1 to 150 meter
  • Ferrule Polish: UPC (Standard) or APC (Angled)
  • Modes: OS2, OM2, OM3, OM4
  • Insulation: Plenum, Riser

OptoSpan Advantage:

  • Terminated and tested in a ISO 14000 (Class 7) quality controlled clean room
  • Each cable assembly comes with its own serial number, diagram, and certified test report
  • Complimentary design and configuration assistance provided by experts to assure precise polarity & termination

8-144 Fiber OM4 50/125 Multimode MPO to LC Breakout Cables

Multimode OM4 fiber MPO to LC breakout cables featuring 50/125 micron fiber core/cladding diameter.  These breakout cables are available in 8-144 fiber strands with high performance MPO connectors on one end and premium LC connections on the other.  OM4 is fully backward-compatible with existing OM3 systems, but provides benefits over OM3 fiber.  See OM4 fiber key advantages.

8-144 Fiber OM3 50/125 Multimode MPO to LC Breakout Cables

Multimode 8-144 fiber MPO to LC breakout cables with OM3 fiber and 50/125 fiber core/cladding diameter are able to provide a value based solution for innovative network improvements.  These MPO breakout cables have high performance MPO connectors on one end and fan out to premium LC connections on the other with Riser (PVC) rated insulation.

MTP Breakout Cables

8-144 Fiber OM2 50/125 Multimode MPO to LC Breakout Cables

Multimode OM2 MPO to LC breakout cables featuring a 50/125 micron core with 8-144 fibers.  These Riser (OFNR) rated breakout cables are ideal for 10G/40G network links and are equipped with premium MPO connectors on one end and a 12 fiber configuration LC fanout on the other.

8-144 Fiber OS2 9/125 Single-Mode MPO to LC Breakout Cables

These 8-144 fiber OS2 Single-Mode MPO to LC breakout cables contain a relatively narrow 9/125 micron core, but carry higher bandwidth in comparison to multimode fibers.  These fiber breakouts are equipped with premium MPO connectors on one end and LC fan out connections on the other.