100G OS2 Single Mode Fiber Patch Cables

OS2 Armored Fiber Optic Cables

The OS2 standard fiber patch cable allows for the lowest amount of attenuation when compared to the multimode specifications.  Single-Mode OS2 carries a mere 0.4dB per km for 1310nm wavelength and 0.2dB per km for 1550nm wavelength.

Each fiber patch cable is available in simplex or duplex configuration, along with UPC or APC polishes. These premium 100G OS2 Single-Mode fiber patch cables allow for high speed transfer rates at distances unachievable by the multimode variations, allowing a much more robust fiber optic network.

Available in various configurations with popular connectors such as LC, FC, SC, ST, FC/APC, LC/APC, SC/APC and MTRJ, along with lengths ranging from 1 to 500 meters, these premium fiber cables may also be altered as per customer specifications in order to meet specific networking demands.  Other OptoSpan Fiber Patch Cables include 100G OM4 Multimode Fiber Cables, 10G OM3 Multimode Fiber Patch Cables, OM2 Multimode Fiber Patch Cables, OM1 Multimode Fiber Patch Cables, Plenum Fiber Optic Patch Cables, and Uniboot Fiber Optic Patch Cables.

Click Here for additional information on OptoSpan Fiber Patch Cables.

For all other OptoSpan Fiber Optic Cables, please see Armored Fiber Optic Cables, MTP Cables, MPO Cables, Specialty Fiber Optic Cables, Breakout Fiber Optic Cables, Bend Insensitive Fiber Cables, and Bulk/Bare Fiber Spools.

Simplex Patch Cables Data Sheet
Duplex Patch Cables Data Sheet

Configurations:

  • OS2 Single-mode Fiber in Duplex and Simplex
  • Standard Protective Jacket
  • Permutations LC, FC, SC, ST, MTRJ Connector Types
  • Duplex Fiber Count
  • 50/125μ Core/Cladding Diameter
  • Riser (OFNR) Rated Insulation
  • UPC (standard)/APC (Angled) Polish
Generated by wpDataTables