Contact Us | Toll Free

FIBER OPTIC TESTERS

Fiber Tester LC

OptoSpan Fiber Optic Cable Testers allow quick and easy testing to trace any fiber defects within an optical cable. These testers contain a visible 650nm red light laser that travels through the cable and pinpoints any cracks or breaks with a visible radiant glow in LC, SC, FC, ST, E-2000, or MTP/MPO connectors. Choose between continuous or pulse mode to easily locate and identify any refractions that may occur and recognize where the defect lies.

OptoSpan fiber optic cable testers and checkers use red light of 650nm wavelength to pinpoint the exact location of any possible breaks and cracks in single-mode or multimode fiber for up to 3km.

Click Here for additional information on OptoSpan Specialty Fiber.

For all other OptoSpan Specialty Fiber Products, please see Specialty Fiber Optic Cables, MTP Elite Cables, Fiber Optic Cleaners, Field Installable Connectors, Fiber Optic Adapters, and Fiber Optic Attenuators.

Fiber Tester LC

LC/SC/FC/ST Fiber Optic Cable Tester

OptoSpan’s FIBER-TEST-LC (For LC, SC, FC, ST, E-2000 connectors) is a simple fiber optic cable tester that uses 650nm red light to pinpoint the location of any breaks and cracks in the single-mode or multimode fiber for up to 3km. If any breaks or defects are within the fiber, the refracting red light will create a bright, visible glow around the faulty area. Its Continuous and Pulse mode is supported by Auto Power Control circuit design to provide a stable LD output power (>.5mW@25 into single-mode fiber). Includes 2.5 (SC, FC, ST) to 1.25 (LC) Adapter. Laser Class 2B device. Made in Japan.

Fiber Tester SC

SC/FC/ST Fiber Optic Cable Tester

OptoSpan’s FIBER-TEST-SC (For SC, FC, ST, E-2000 connectors) is a simple fiber optic cable tester that uses 650nm red light to pinpoint the location of any breaks and cracks in the single-mode or multimode fiber for up to 3km. If any breaks or defects are within the fiber, the refracting red light will create a bright, visible glow around the faulty area. Its Continuous and Pulse mode is supported by Auto Power Control circuit design to provide a stable LD output power (>.5mW@25 into single-mode fiber). Laser Class 2B device. Made in Japan.

Fiber Tester MPO

MTP/MPO Fiber Optic Cable Tester

OptoSpan’s FIBER-TEST-MPO (for MPO/MTP connectors) is a simple fiber optic cable tester that uses 650nm red light to pinpoint the location of any breaks and cracks in 4, 8 or 12 channel single-mode or multimode fiber for up to 3km. If any breaks or defects are within the fiber, the refracting red light will create a bright, visible glow around the faulty area. Its Continuous and Pulse mode is supported by Auto Power Control circuit design to provide a stable LD output power (>.5mW@25 into single-mode fiber). Its internal lithium battery is re-chargeable via USB ports. Laser Class 2B device. Made in Japan.